NORDEE Steigeisen-Set

The kit replaces the front spatula spikes and heel spikes for a pair of EVVO NORDEE snowshoes.

The kit includes ICESPIKE screws with carbide tips. These provide mechanical anchoring in ice for better grip on such surfaces. The front claws ensure ground anchoring while walking.

Each foot includes 10 ICESPIKE carbide tips and 2 front claws.

The screws act as fasteners between the straps and the composite spikes that contact the ground.

Do it yourself! Change your heel deck:

1. Unscrew the 10 ICESPIKE screws from your NORDEE using a T25 screwdriver bit (not included).

2. Remove the two front claws and the 2 lower claws using a 6mm hex screwdriver bit (bit not included).

3. Position the new spikes in the front and heel decks.

4. Tighten the new ICESPIKE screws with a torque of 2.5N.m using a T25 bit (bit not included).

5. Tighten the new front and lower claws with a torque of 1N.m using a 6mm hex bit (bit not included), and you’re done.

For replacement instructions, the tutorial is available on our YouTube channel. (Include link to tutorial)

EVVO Loop: Return your old parts to EVVO, and we will recycle them into new snowshoes.

EVVO is committed to the environment. Our products are 100% repairable and recyclable. Please dispose of the old plastic parts in plastic containers and the screws in metal containers.

Your deck kit was entirely developed and manufactured in France.

Join the snowshoe rEVVOlution!